Detailed Product Description

General Description

Our self-healing type low voltage shunt capacitor, applied the advanced Zn-Al complexed
metallized film, adopted foreign advanced production techology techniques and international
IEC931-1(1988) Standards.The products are mainly suitable for low voltage electric
network to improve power factor, reduce reactive loss, and improve the voltage quality.

Service condition

Use indoor
Temperature range:-25~50
RH(humidity: less then85%RH)
Altitude: lower than 2000m
Mounting Ambient: no harmless gas and steamed gas.no inductive
and explosive dust,no violent vibration;

 Characteristics

1.Small volume, light weight; lt is only 1/4 and 1/5 of the the weight and volume of
the outdated products respectively.

2.Low loss; With the actual loss less than0.1, little radiation, low temperature rise,
and good energy conservation effect

3.Excellent self-healing performance: When a part of the isolation is fed through due
to the overvoltage, it is capable of self-healing so as to continue the operation, therefore
the reliability is improved greatly.

4.Safety: Equipped with self-discharging resistant and safty devices inside, the
inner discharging resistant can make the attached electric discharged; when there is
wrong with the capacitor, the fuse equipment can cut out the elcctric power, so that no more
trouble with the capacitor,safety and reliable
Without oil leakage;this product adopted advanced half-solid soak materials drips
meltin-point higher than 70, avoid leakage during operation and protect the enviro-
nment, the capacitor will not no use since the leakage.

5.Technical characteristics
Rated Voltage:400VAC 450VAC 525VAC 690VAC/14KVAC1~60kvar
Rated output:1~60kvar
Capacitance Tolerance0~+10%
Withstand voltage of case between terminals and container: 3KV(AC)10s 

Insulativity: 500VDC among the phases 1 min more than 1000MΩ
Max allowable voltage: Rated voltage 110%
Max allowable current: Rated voltage 130%
Self-discharging characteristics: switch off the power supply
for 1min, the residual voltage Less than 50V